Bernina 740 Manual - Page 57
Bernina 740 Manual
View all Bernina 740 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
0 0 0 0 Irw.:9 0 O Nlindstltrb presser foot (No. 690602.OS) • position of needle stitch to the left • Folded upper layer of cloth O Needle plate • Material stop and guide • Position ofneedlestitch to the right After having threaded the sewing machine, put the lower flat piece of cloth underneath the blindstitch presser foot: then place the upper piece of cloth on top and fold it in such a way that it al• ways touches the elastic guide. Now tower the blindstitch presser foot and start sewing. The zigzag Mitch width should be adjusted in such a way on the zigzag button 18 that in its left deflection the needle is stitching through the middle of the folded piece of cloth, which will make the seam invisible on the upper piece of material when flattened. Said stitch width is between 2 and 3, depending on the thickness of the Moth used. 2. Adluatraent al sonfitig pt00tting fur walking with the blindatItch cam Whereas, when blindstitching with the normal zigzag stitch. the folded piece of cloth is pierced after every second stitch, when employing the blindstitch cam there are five straight plain stitches between each piercing of the folded piece of material. Thus the machine should be adjusted as explained hereunder, a) Attach blindstitch presser foot b) Connect automatic device backwards by means of lever 13 (see fig. 1 and 72) c) Set lever 12 on blindstitch ram (see no. 1) d) Set needle into right position of stitch e ) Set zigzag knob 18 to a stitch width between 2 and 3, according to the thickness of the material to be sewn f 5 Set stitch larch ecirulatioo loror 24 oo a stitch length of 2, 3. or 4. depending on the kind of cloth to be sewn g) Set feed dog reversible knob 25 on •sewing, symbol. The blindstitching itself is made exactly as has been described under section 1. 65