Bernina 740 Manual - Page 26

r--4 /91$ 4 .41 Fig :F. both sections under the fellerfoot as when hemming. so that they fold over. Make sure that the sae • width of material einem the fellerfoot. Hemmer Ilion with a width of approximately ay") Attach the hemmer in place of the ordinary presser foot, raising the prewar foot to this purpose. Fold the edge of the material over to the desired hem width and guide the so prepared fabric into the spiral-typo guide tongue of the raised hemmer till under the needle; then lower the hemmer. When sowing, lightly guide the prefolded edge (lee fig.29). If too much fabric enters the hemmer, the seam will appear bulgy and quite uneven; if too little, the hem will not be folded in sufficiently and does not close the seam in the way which is correct and nice to look at. Car4 !_fp 2nd opt:allele (sect f Ir. 28) The two fabric sections are now unfolded and laid flat, so that the seam which has been formed stands up like a pleat. The pleat is again passed into the fellerfoot is the same direction as eras the ease the first time, so that it is folded over and can now be sewn down.