Bernina 740 Manual - Page 59
regulating
View all Bernina 740 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
I :a. it 9 8 9 35 OlI C 88 0 Thread tension regulator 35 Spool pin 7 Thread take-up lever 44 Thread guide slit 8 Thread Icaxion 45 Needle bolder eyelet 9 Thread tension regulating disc 100 Additimud tension Threading the two upper threads To thread I he two upper !breath of the sowing mnchino for pintucking, proceed as for normal sewing (see fig. 81). Place the two reels of thread onto the two pins 35 of the double spool holder at the back of the top of the machine arm. Now pass the thread of the front reel through pretension 43, equally at the back of machine: from there into slit 44 running across top arm and draw the thread Into left tension disc, down to thread tension regulator 4, and up again through the back bore of thread take-up lever 7. Then down again to needle bolder eyelet 45 and finally from front to rear through the eye of left needle. With the second thread proceed in the same manner, but draw it through the right tension disc and following this a ill through additional tension 100. Prom there through thread tension regulator 4 up to thread take-up lever 7 and into the front slit of same. Now down on:* more to needle holder eyelet and finally through the eye of right needle. Both threads should always rim separately through thread tension S. in order to produce finer pintucks.