Bosch DHR-1600A-150A Installation Manual - Page 26

Audio connections, Monitor connections

Get Bosch DHR-1600A-150A PDF manuals and user guides View all Bosch DHR-1600A-150A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

26 en | Hardware setup Divar XF 4.5 terminating. There is no need to add a terminator to the output connector if no additional equipment is connected. If the camera signal is looped-through to additional equipment, make sure that the end of the video line is terminated with 75 ohm termination. The DivarXF automatically configures itself as a PAL or NTSC unit. The unit determines the standard by detecting the signal format of the first connected camera (lowest camera input number). Specifications Input signal: Composite video 1 Vpp, 75 ohm Color standard: PAL/NTSC, auto-detect Gain control: Automatic or manual gain control for each video input Connector type: BNC looped-through, automatic termination 1 2 3 4 5 6 7 8 Video in 1 2 3 4 5 6 7 8 Video out Figure 4.5 Eight video inputs with loop-through outputs Audio connections The DivarXF supports up to 16 audio inputs and 4 audio outputs. Connect using audio cable with RCA compatible connectors. Specifications Input signal: Mono RCA, 1 Vpp, 10k ohm Output signal: Dual mono RCA, 1 Vpp, 10k ohm 1 3 5 7 9 11 13 15 4.6 4.6.1 2 4 6 8 10 12 14 16 Audio in Figure 4.6 Audio input connectors L R A B Audio out Figure 4.7 Audio output connectors Monitor connections Up to two monitors can be connected through the VGA, CVBS, or Y/C connections. VGA Connect the unit to one or two VGA monitors using standard VGA cable. It is advised to use 17" monitors or larger when using LCD(s). F.01U.135.429 | 2.5 | 2009.08 Installation manual Bosch Security Systems

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
26
en | Hardware setup
Divar XF
F.01U.135.429 | 2.5 | 2009.08
Installation manual
Bosch Security Systems
terminating. There is no need to add a terminator to the output connector if no additional
equipment is connected.
If the camera signal is looped-through to additional equipment, make sure that the end of the
video line is terminated with 75 ohm termination.
The DivarXF automatically configures itself as a PAL or NTSC unit. The unit determines the
standard by detecting the signal format of the first connected camera (lowest camera input
number).
Specifications
Input signal: Composite video 1 Vpp, 75 ohm
Color standard: PAL/NTSC, auto-detect
Gain control: Automatic or manual gain control for each video input
Connector type: BNC looped-through, automatic termination
Figure 4.5
Eight video inputs with loop-through outputs
4.5
Audio connections
The DivarXF supports up to 16 audio inputs and 4 audio outputs. Connect using audio cable
with RCA compatible connectors.
Specifications
Input signal: Mono RCA, 1 Vpp, 10k ohm
Output signal: Dual mono RCA, 1 Vpp, 10k ohm
Figure 4.6
Audio input connectors
Figure 4.7
Audio output connectors
4.6
Monitor connections
Up to two monitors can be connected through the VGA, CVBS, or Y/C connections.
4.6.1
VGA
Connect the unit to one or two VGA monitors using standard VGA cable. It is advised to use
17” monitors or larger when using LCD(s).
Video in
Video out
1
2
3
4
1
2
3
4
5
6
7
8
5
6
7
8
Audio in
1
3
5
7
9
11
13
15
2
4
6
8
10
12
14
16
Audio out
A
B
L
R