Bosch DHR-1600A-150A Installation Manual - Page 71
Getting started, How to log
View all Bosch DHR-1600A-150A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Divar XF 7 7.1 7.1.1 7.1.2 7.1.3 7.2 Using the Configuration Tool | en 71 Using the Configuration Tool The Configuration Tool is a software application that makes the installation and configuration of a unit faster and easier. The Configuration Tool runs on a PC that is connected to the Divar XF via an Ethernet network connection. Although all settings can also be configured with the on-screen display menu of the Divar XF itself, the Configuration Tool offers a very user-friendly alternative. It also allows configuration settings to be saved on the PC hard disk. These can be restored later and used to configure other units. Getting started To use the Configuration Tool to change settings, connect the unit to a PC via a network connection. The Configuration Tool application must be installed on the PC. System requirements Operating platform: A PC running Windows XP or Windows Vista. For the Configuration Tool, the recommended PC requirements are: - Processor: Intel Pentium 4 or comparable - RAM memory: 512 MB - Free hard disk space: 10 GB - Graphics card: NVIDIA GeForce 6200 or higher - Network interface: 10/100-BaseT Installing the Configuration Tool The Configuration Tool is optionally installed on the PC when the Control Center application is installed. To install separately: 1. Insert the CD-ROM into the CD-ROM drive on the PC. - The installation program starts automatically. 2. If installation does not start automatically, locate the Setup.exe file on the CD and double click it. 3. Follow the instructions on the screen and select the install Configuration Tool when asked to complete the installation. Starting the Configuration Tool Network connection To start the Configuration Tool without using the Control Center, double click the Configuration Tool icon on the desktop window to start the program. Alternatively, select the Divar XF Configuration Tool program via the Start button on the task bar and the Programs menu item. Follow the log on procedure. To start the Configuration Tool via the Control Center, click the Config button in the Control Center window. This shows a CT log on dialog with all known Divar XF devices. Offline configuration To log on with an offline configuration, select the Divar XF version, model, the video standard, and the cameras that are connected. How to log on When starting the Configuration Tool via a network, the Log on window appears. (Click Cancel to discontinue log on and exit the application.) Bosch Security Systems Installation manual F.01U.135.429 | 2.5 | 2009.08