Bosch DHR-1600A-150A Installation Manual - Page 34
Malfunction relay, Power supply, Maintenance
View all Bosch DHR-1600A-150A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
34 en | Hardware setup Divar XF 4.15 4.16 Malfunction relay The malfunction relay will be activated upon system failure. Connect using the supplied screw terminal adapter. The recommended cable diameter is AWG 28-16 (0.08-1.5 mm2). - | + | G RS 485 MAL OUT N0 | C | NC Figure 4.19 Malfunction relay output Power supply Power is supplied to the unit via the IEC-style socket. For security reasons, the unit has no on/ off switch. This means that the unit is always powered as long as the power cable from the unit is connected to a live power socket. Specifications: Input Voltage: 100 - 240 VAC ±10% Current: 0.7A - 0.3 A Input Frequency: 50/60 Hz AC 4.17 Figure 4.20 Power supply socket Signal name LIVE NEUTRAL PE Pin Top Bottom Middle Table 4.9 Power supply socket Description AC live AC neutral Protective Earth Maintenance Maintenance of this unit is limited to external cleaning and inspection. Refer all servicing to qualified service personnel. DANGER! Electrical voltage. Risk of electric shock. Do not open the top cover or attempt to service the unit. No user serviceable parts inside. Refer all servicing to qualified service personnel. Opening the top cover will void the warranty! F.01U.135.429 | 2.5 | 2009.08 Installation manual Bosch Security Systems