Bosch DHR-1600A-150A Installation Manual - Page 60

Normal, Contact, Motion

Get Bosch DHR-1600A-150A PDF manuals and user guides View all Bosch DHR-1600A-150A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

60 en | Advanced configuration menu Divar XF 6.4.1 6.4.2 6.4.3 6.4.4 Normal Set values for each of the following fields: - Normal recording mode: - Continuous - set to record continuously - Event only - set to record events only - No Recording - set to disable recording - Pre-Event Time: - set between 1 and 120 seconds (only applicable when recording Event only) - Resolution: - set the video resolution to 4CIF (704 x 576/480 PAL/NTSC), 2CIF (704 x 288/240 PAL/NTSC), or CIF (352 x 288/240 PAL/NTSC). - Quality: - set the video quality setting to High, Medium or Standard. - Frame rate: - set the video frame rate to 25/30, 12.5/15, 6.25/7.5, 3.125/3.75 or 1/1 ips (images per second in PAL/NTSC). - Record audio: - check to enable audio recording. - Audio quality: - set the audio quality to High, Medium or Standard. Note: For information on bit rates, refer to ....... Contact The fields have the same parameters as those under the Normal tab. Additional fields are present for contact recording. - Contact recording: - Fixed duration - activates recording for the set duration from the start of the event. - Follows + Post - activates recording as long as the event is active and continues after the event becomes inactive for the time set in the duration field. - Follows - activates the recording only as long as the event is active. - No recording - Set the duration time in minutes and seconds. Motion The fields have the same parameters as those under the Normal tab. Additional fields are present for motion recording. - Motion recording: - Fixed duration - activates recording for the set duration from the start of the event. - No recording - Set the duration time in minutes and seconds. Copy The copy recording settings function makes it easy to set up recording for all profiles and all cameras. The copy function copies content from within a single profile to other profiles. The camera inputs and the recording modes within each of these profiles can be selected. To copy recording settings: 1. Check the Copy multiple cameras box if you wish to copy several camera inputs within the From profile. 2. Select the profile number to copy from. F.01U.135.429 | 2.5 | 2009.08 Installation manual Bosch Security Systems

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
60
en | Advanced configuration menu
Divar XF
F.01U.135.429 | 2.5 | 2009.08
Installation manual
Bosch Security Systems
6.4.1
Normal
Set values for each of the following fields:
–
Normal recording mode:
–
Continuous - set to record continuously
–
Event only - set to record events only
–
No Recording - set to disable recording
–
Pre-Event Time:
–
set between 1 and 120 seconds (only applicable when recording
Event only
)
–
Resolution:
–
set the video resolution to 4CIF (704 x 576/480 PAL/NTSC), 2CIF (704 x 288/240
PAL/NTSC), or CIF (352 x 288/240 PAL/NTSC).
–
Quality:
–
set the video quality setting to High, Medium or Standard.
–
Frame rate:
–
set the video frame rate to 25/30, 12.5/15, 6.25/7.5, 3.125/3.75 or 1/1 ips (images
per second in PAL/NTSC).
–
Record audio:
–
check to enable audio recording.
–
Audio quality:
–
set the audio quality to High, Medium or Standard.
Note:
For information on bit rates, refer to
.......
6.4.2
Contact
The fields have the same parameters as those under the Normal tab. Additional fields are
present for contact recording.
–
Contact recording:
–
Fixed duration
- activates recording for the set duration from the start of the event.
–
Follows + Post
- activates recording as long as the event is active and continues
after the event becomes inactive for the time set in the duration field.
–
Follows
- activates the recording only as long as the event is active.
–
No recording
–
Set the duration time in minutes and seconds.
6.4.3
Motion
The fields have the same parameters as those under the Normal tab. Additional fields are
present for motion recording.
–
Motion recording:
–
Fixed duration
- activates recording for the set duration from the start of the event.
–
No recording
–
Set the duration time in minutes and seconds.
6.4.4
Copy
The copy recording settings function makes it easy to set up recording for all profiles and all
cameras. The copy function copies content from within a single profile to other profiles. The
camera inputs and the recording modes within each of these profiles can be selected.
To copy recording settings:
1.
Check the
Copy multiple cameras
box if you wish to copy several camera inputs within
the
From
profile.
2.
Select the profile number to copy from.