Bosch DHR-1600A-150A Installation Manual - Page 66
IP Range, Monitor Streaming
View all Bosch DHR-1600A-150A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
66 en | Advanced configuration menu Divar XF 6.8.2 6.8.3 - If DHCP is disabled, fill in the IP address, the Subnet mask, the Default gateway, and the DNS Server address. If required, change the default HTTP port (80) to a new value. - Restrict the network bandwidth by entering a Mbps value between 0.1 and 100 for the Bandwidth limit. - The MAC address is read only; it shows the MAC address of the DVR. - Cable connected shows the status of the physical network connection. IP Range - Eight IP ranges can be entered to allow access. - Enter the same begin and end address to specify a single IP address. Enter different begin and end addresses to specify an IP address range. Monitor Streaming The remote monitor streaming function allows monitor output A and/or B to be streamed remotely via one or more of the analog video inputs. The main advantage of using this feature is that multi-screen images can be viewed remotely using just one video stream, thus requiring only a limited amount of network bandwidth and computer resources. Each of the analog video inputs can be configured as: - Camera input (default). - Streaming output A (input is used to stream monitor output A). - Streaming output B (input is used to stream monitor output B). Note: Disable the recording of a channel used for monitor streaming in the Recording tab. Figure 6.10 Network menu - Monitor streaming F.01U.135.429 | 2.5 | 2009.08 Installation manual Bosch Security Systems