Bosch HBL5760UC Use & Care Manual (all languages) - Page 17

Timer Feature To Use as a Kitchen Timer Example: To count down 5 minutes To set Stand Time Example: To cook at P6 power for 3 minutes, with stand time of 5 minutes To set Delay Start Example: To delay the start of cooking for 5 minutes, and cook at P6 power for 3 minutes. Notes This feature allows you to program the oven as a kitchen timer. It can also be used to program a standing time after cooking is completed and/or to program a delay start. CAUTION:ĄIf oven lamp is lit while using the timer feature, the oven is incorrectly programed. Stop oven immediately and reĆread instructions. 1. Press Timer. 2. Set desired amount of time using number pads. (up to 99 minutes and 99 seconds). 3. Press Start. Time will count down without oven operating. 1. Press Power Level pad 5 times. 2. Set desired cooking time using number pads. 3. Press Timer. 4. Set desired amount of Stand Time using number pads. (up to 99 minutes and 99 seconds). 5. Press Start. Cooking will start. After cooking, stand time will count down without oven operating. 1. Press Timer. 2. Enter desired amount of delay time using number pads. (up to 99 minutes and 99 seconds). 3. Press Power level 5 times. 4. Set desired cooking time using number pads. 5. Press Start. Delay time will count down. Then cooking will start. D When each stage finishes, a twoĆbeep signal sounds. At the end of the program, the oven will beep five times. D If the oven door is opened during Stand Time, Kitchen Timer or Delay Time, the time on the display will continue to count down. D Stand time and Delay start cannot be programmed before any automatic Function. This is to prevent the starting temperature of food from rising before defrosting or cooking begins. A change in starting temperature could cause inaccurate results. 17