Bose Companion Surround Sound Owner's guide - Page 12
Aucio
View all Bose Companion Surround Sound manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
(2) Connecting devices with Svkleo or composite video inputs and outputs For components with S-video and/or composite video outputs, use the appropriate cables to connect them to your Companion'" controller • if your TV/monitor or VCR has composite video (yellow RCA/phono plug connections) inputs only, use only the composite video connections on the controller. • If your TV/monitor or VCR has both S-video and composite inputs, connect both Svideo and composite video to your controller to allow more choices when operating the system. Note: S-video and composite video are parallel, independent connections. For example, if an S-video signal comes into the controlleritmust go out as S-video. Some TVs automatically select S-video Input, if it is present. If your VCR has composite video connections only, an autoswitch TV selects the composite input when the VCR is the source. If your TV does not automatically select the video source, connect composite video to TV input 1 and S-video to TV input 2 so you can select which signal to receive. See Figure 10 for an example of a setup using S-video connections. 0• 0 6 Types of connections: Figure 10 AUCIO right and left Sample configuration using Composite video - S-video connections S-video RF i ! i ! I i i ! i ....-rl Dit 71:111 , i, (3) Connecting your components a. Connect your satellite system receiver video output to the controller S-video and/or composite video SAT INPUT. Connect the SAT audio ouput to the controller SAT AUDIO left (L) and right (R) INPUTs. b. Connect your primary VCR to the controller S-video and/or composite video VCR INPUT(s) and the controller VCR AUDIO left (L) and right (R) INPUTs. Do not connect sources other than your VCR to the VCR connections. c. Connect the VCR OUTPUT L and R to your VCR audio L and R inputs. Connect VCR OUTPUT to the VCR video Input. When VCR is the source selected, you cannot record from the audio or video VCR outputs. Note: When you select VCR on the Companion system, video andaudio output from the controller to the VCR stays at the last source selected that was not VCR. Therefore, while recording on the VCR, selecting VCR does not switch from the source you are recording. d. Connect other video sources Qaserdisc player, second VCR, etc.) to the controller Svideo and/or composite video VIDEO 1 or 2 INPUT(s) and the VIDEO 1 or 2 AUDIO left (L) and right (R) INPUTs. Note: The Companion system is compatible with NTSC and most world video formats. However, youmay needadapters to connect these components to the system. 12