Brother International BAS-341F Instruction Manual - English - Page 14
Adjusting the air pressure, If water stands in the bottle of the integrator 1, turn
View all Brother International BAS-341F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
3. PREPARATION 3-9. Adjusting the air pressure 1. Air pressure should be 0.5 MPa. The air pressure can be adjusted by pulling up and turning the control knob (2) on the integrator (1). After adjustment is complete, push the control knob (2) downward to lock it. 2. If water stands in the bottle of the integrator (1), turn the drain cock (3) in the direction indicated by an arrow to drain the water. Note Open the air cock (4) slowly. 1925S BAS-341F, 342F 7
3. PREPARATION
BAS-341F, 342F
7
3-9. Adjusting the air pressure
1.
Air pressure should be 0.5 MPa.
The air pressure can be adjusted by pulling up and
turning the control knob (2) on the integrator (1).
After adjustment is complete, push the control knob
(2) downward to lock it.
2.
If water stands in the bottle of the integrator (1), turn
the drain cock (3) in the direction indicated by an arrow
to drain the water.
Note
Open the air cock (4) slowly.
1925S