Brother International BAS-341F Instruction Manual - English - Page 35
time a program is sewing., This is only required the first
View all Brother International BAS-341F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
7. SEWING 5. Step on the presser lifter switch (2) to raise the presser foot. 6. Insert the work piece under the work clamp, and press the presser lifter switch (2) to lower the clamp. 7. Press the starting pedal (1). Note The work clamp will return to the origin, and will then advance to the sewing start position and blinking will stop. This is only required the first time a program is sewing. 8. Press the starting pedal (1) again to start sewing. After sewing is completed, the thread cutter will automatically operate, then the work clamp will rise. 1942S Note When the power is turned on after once being turned off, the same pattern of sewing can be continued since the machine will stores the sewing data from the last time. BAS-341F, 342F 28