Brother International BAS-341F Instruction Manual - English - Page 42
STANDARD ADJUSTMENTS, <Adjusting the engagement of the movable knife and fixed knife>, ng edge
View all Brother International BAS-341F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
9. STANDARD ADJUSTMENTS 1958S 2. Remove the movable knife, and replace it with a new movable knife. Now check the cutting edge of the movable knife (9) and the fixed knife (10). If necessary, use the provided movable knife washer (11) (T=0.4, T=0.5, T=0.6) to adjust the knives so that they cut properly. (Figure is BAS-342F.) 1247S A B C D Cutting (9) edge Cutting edge Fig. 1 0149S Movable knife Fixed knife Cutting edge Cutting edge 0148Q A. After the movable knife and fixed knife are properly engaged, tighten the screw as shown in Fig.1. B. Turn the movable knife (in the direction of the arrow) while the screw is still tightened. C. Loosen the screw. D. Turn the movable knife (in the direction of the arrow) while the screw is still loosened. Repeat above steps A, B, C and D four or five times to maintain the cutting performance of the knife. 0150Q 3. Install the fixed knife (10) 0.5 mm away from needle hole plate (12). 1959S BAS-341F, 342F 35