Brother International BAS-341F Instruction Manual - English - Page 6

CONTENTS 1. NAME OF MAJOR PARTS ...1 2. SPECIFICATIONS ...2 3. PREPARATION ...3 3-1. Before setting up ...3 3-2. Positioning ...4 3-3. Tilting the sewing machine head ...4 3-4. Connecting the ground wire ...5 3-5. V-belt tension ...5 3-6. Installing the foot switch ...5 3-7. Installing the spool stand ...6 3-8. Installing the programmer (option) ...6 3-9. Adjusting the air pressure ...7 4. LUBRICATION ...8 4-1. Lubrication points ...8 5. CORRECT USE ...9 5-1. Selecting the needle and thread ...9 5-2. Installing the needle and urnning the sewing machine 9 5-3. Threading the upper thread ...10 5-4. Winding the lower thread ...11 5-5. Replacing the bobbin case and threading the thread 12 5-6. Sewing conditions and thread tension ...12 5-6-1. Sewing conditions ...12 5-6-2. Lower thread tension ...13 5-6-3. Upper thread tension ...13 5-6-4. Thread take-up spring height ...13 5-6-5. Thread take-up spring tension...13 5-6-6. Pretension tension ...14 6. USING THE OPERATION PANEL 15 6-1. Explanation of panel ...15 6-2. Using the floppy disk ...17 6-3. Using the program R/W (Read/Write) switch ...19 6-4. Using the TEST switch (Checking the sewing pattern 20 6-5. Using the emergency stop switch ...21 6-6. Adjusting the sewing SPEED control ...22 6-7. Changing the X-SCALE and Y-SCALE settings ...22 6-8. Using the bobbin thread counter ...23 6-9. Using production counter ...24 6-10. Using single split mode ...25 6-11. Shifting a stitch pattern ...26 BAS-341F, 342F