Brother International BAS-341F Instruction Manual - English - Page 49
If DIP switch, Needle cooler output is produced.
View all Brother International BAS-341F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
10. DIP SWITCH DIP switch A SW No. When ON A-5 After sewing is completed, work clamp does not automatically rise (only in split mode) A-6 Clamping force output is produced (Inner clamping device available as an option) A-7 Single-pedal operation using the starting switch; when the starting switch is pressed, the work clamp drops, and when it is released, sewing starts. A-8 Thread breakage detector device is activated DIP switch B SW No. When ON B-1 Single split mode activated B-2 Feed movement when not using work clamp, activated B-3 Thread is not trimmed after an emergency stop. B-4 Needle cooler output is produced. B-5 When a rotating-type thread breakage detector device is used, detection precision is increased from 8 to 14. When a fiber-type thread breakage detector device is used, detection precision is increased from 5 to 10. B-6 Fiber-type thread breakage detector device is ON, and DIP switch A - 8 is ON (available as an option) B-7 When using a 3-stage pedal If DIP switch A -2 is ON at the same time, the presser foot will drop at the same time that work clamp drop. B-8 Feeding speed is switched to high speed. BAS-341F, 342F 42