Brother International BES-1240BC Instruction Manual - English - Page 166
Adjust, Click [OK] when the items are set., Select [Adjust] from Settings menu.
View all Brother International BES-1240BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Chapter 6 Embroidering 2. Click [OK] when the items are set. Manually trim the lower thread immediately after resetting a thread breakage error if feeding by stitch back is long (i.e., 40 to 50 mm or more) when "After the end of mending" is set to "Non stop". Set "When the machine is stopped" to "Trim lower theread only". Adjust Adjustment value of the needle is set. The adjustment value is set at the increment of 0.1 mm. The setting range is -0.5 ~ 2 mm in X and Y directions. 1. Select [Adjust] from Settings menu. 2. When setting is complete, click [OK]. 164 BES-940BC • BES-1240BC
BES-940BC • BES-1240BC
164
Chapter 6
Embroidering
2.
Click [OK] when the items are set.
Manually trim the lower thread immediately after resetting a thread breakage error if feeding by
stitch back is long (i.e., 40 to 50 mm or more) when "After the end of mending" is set to "Non
stop".
Set "When the machine is stopped" to "Trim lower theread only".
Adjust
Adjustment value of the needle is set.
The adjustment value is set at the increment of 0.1 mm.
The setting range is –0.5 ~ 2 mm in X and Y directions.
1.
Select [Adjust] from Settings menu.
2.
When setting is complete, click [OK].