Brother International BES-1240BC Instruction Manual - English - Page 171
Default Settings, Resets changes of the machine setting to the default.
View all Brother International BES-1240BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
Chapter 6 Embroidering Default Settings Resets changes of the machine setting to the default. Items for setting and initialization are as follows: Speed Range Head Operation Suspend Hoop Feed Position Embroidering Area Thread Trimming Boring Thread Breakage Sensor Automatic Step Back Thread Breakage Sensor Sensitivity Automatic Feed Hoop Return to the start point Mending Automatically selects the value suitable for the hoop type. Cancels the head operation which is not set for rest on the machine. Returns to the machine home position. Sets the size each for the selected hoop. Inching motion Thread removal feed length Thread remaining amount Yes 15 mm (0.6 inch) 5 Boring No Data shift No All sensors are on. Sensitivity 10 0 Not affected by the thread breakage sensor sensitivity No Yes Automatically rest breakage error Automatically reset the rotary hook thread entanglement error Raise the presser foot when resetting the thread trimming error Stop the machine at the mending end position Stitches before mending Trim during stop in mending setting Conduct lock stitch when trimming thread No No Yes Yes 1 stitch No No Adjustment 0.0 mm for X direction 0.0 mm for Y direction Speeding up startup of the main shaft Hoop feed during temporary stop for color change Reducing speed in a small pitch Thin material or thick material Area Trace "Eight-sided" is selected. No No No 110 degrees BES-940BC • BES-1240BC 169