Brother International BES-1240BC Instruction Manual - English - Page 49
Replacement of Bobbin, tension spring
View all Brother International BES-1240BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Chapter 2 Preparation of Embroidery Machine 3-2 Replacement of Bobbin Note) Remove dust, lint and oil from the bobbin case before replacement. Removing bobbin case w 1. Open the rotary hook cover B q. 2. Hold the knob w and take out the bobbin case. 3. Close the knob and take out the bobbin e. q e Replacing bobbin Pull out by about 50 mm t r 1. Put a new bobbin in the bobbin case. 2. Slide the thread under the tension spring t through the notch r. 3. Pull out the thread from the hole of the tension spring t. 4. Pull out the thread by about 50 mm. 5. The winding direction is as shown in the illustration at left. Attaching bobbin case w 1. Hold the knob w and attach the bobbin case securely. 2. Close the rotary hook cover B q. q BES-940BC • BES-1240BC 47