Brother International BES-1240BC Instruction Manual - English - Page 245
Adjustment of Presser Foot Height
View all Brother International BES-1240BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 245 highlights
Chapter 10 Standard Adjustment 7. After timing adjustment the is finished for each head, set the pulley to the stop position (at 100˚ of the scale) and press the STOP switch. "STEP" disappears from the display, and the machine enters the standby state. STOP The adjustment of the rotary hook is completed and the timing is stored. The rotary hook returns to the stop position accordingly. 5. Adjustment of Presser Foot Height w q material 1. Turn the power switch off. 2. Select the needle bar No. 1. 3. Loosen the screw w of the presser foot q, and adjust the presser foot q until it comes above the cloth top surface when it is at the bottom dead center (where the pulley indication mark " " and the cover indication mark " " are aligned). BES-940BC • BES-1240BC 243