Brother International DCP-7065DN Users Manual - English - Page 92
Network, Wired LAN, Ethernet, Wired, Status, Address, Set to, Default, Reset, Wired, Enable, TCP/IP
UPC - 012502627128
View all Brother International DCP-7065DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Level 1 Level 2 4.Network 1.Wired LAN (For HL-2280DW) (Continued) (Continued) Level 3 2.Ethernet 3.Wired Status 2.WLAN 4.MAC Address 5.Set to Default 6.Wired Enable 1.TCP/IP See Network User's Guide. Level 4 Options Descriptions - Auto* Chooses the 100B-FD Ethernet link mode. 100B-HD 10B-FD 10B-HD - Active 100B-FD You can see the Active 100B-HD current wired status. Active 10B-FD Active 10B-HD Inactive Wired OFF - - Shows the MAC address of the machine. - a Reset Restore the wired b Exit network setting to factory default. - 1.Boot Method On* Off Auto* Static RARP Enable or Disable the Wired LAN manually. Chooses the Boot method that best suits your needs. BOOTP 2.IP Address DHCP [000-255]. [000-255]. [000-255]. [000-255] Enter the IP address. 3.Subnet Mask 4.Gateway [000-255]. [000-255]. [000-255]. [000-255] [000-255]. [000-255]. [000-255]. [000-255] Enter the Subnet mask. Enter the Gateway address. 5.Node Name BRWXXXXXXXXXXXX Enter the Node name. 6.WINS Config Auto* Static Chooses the WINS configuration mode. The factory settings are shown in Bold with an asterisk. 78