Brother International DCP-8155DN Basic User's Guide - English - Page 64

Error Message, Cause, Action, DIMM Error, Document Jam, Drum Stop, Duplex Disabled, Fuser Error

Get Brother International DCP-8155DN PDF manuals and user guides View all Brother International DCP-8155DN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

Error Message DIMM Error Document Jam Drum Error Drum Stop Duplex Disabled Fuser Error Jam Duplex Jam Inside Jam MP Tray Jam Rear Cause Action  The DIMM is not installed correctly.  Turn off the machine and remove the DIMM.  The DIMM is broken.  The DIMM does not meet the required specifications. (See Advanced User's Guide: Installing extra memory.)  Confirm the DIMM meets the required specifications. (See Advanced User's Guide: Memory board.)  Re-install the DIMM correctly. Wait a few seconds, and then turn it on again.  If this error message appears again, replace the DIMM with a new one. (See Advanced User's Guide: Installing extra memory.) The document was not inserted or fed correctly, or the document scanned from the ADF was too long. See Document is jammed in the top of the ADF unit uu page 59 or Using the automatic document feeder (ADF) uu page 23. The corona wire on the drum unit needs to be cleaned. Clean the corona wire on the drum unit. (See Cleaning the corona wire uu page 45.) The toner cartridge is placed in Put the toner cartridge into the drum unit, and the machine without the drum then re-install the drum unit and toner cartridge unit. assembly in the machine. It is time to replace the drum unit. Replace the drum unit. (See Replacing the drum unit uu page 48.) The back of the machine is not Close the back cover of the machine. closed completely. The temperature of the fuser unit does not rise to a specified temperature within the specified time. Turn the power switch off, wait a few seconds, and then turn it on again. Leave the machine for 15 minutes with the power on. The fuser unit is too hot. The paper is jammed in the duplex tray or the fuser unit. See Paper is jammed in the duplex tray uu page 70. The paper is jammed inside the See Paper is jammed inside the machine machine. uu page 66. The toner cartridge is placed in Put the toner cartridge into the drum unit, and the machine without the drum then re-install the drum unit and toner cartridge unit. assembly in the machine. The paper is jammed in the MP See Paper is jammed in the MP tray tray of the machine. uu page 61. The paper is jammed in the back of the machine. See Paper is jammed at the back of the machine uu page 63. 54

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
54
DIMM Error
The DIMM is not installed
correctly.
The DIMM is broken.
The DIMM does not meet
the required specifications.
Turn off the machine and remove the
DIMM.
(See Advanced User's Guide:
Installing
extra memory
.)
Confirm the DIMM meets the required
specifications.
(See Advanced User's Guide:
Memory
board
.)
Re-install the DIMM correctly. Wait a few
seconds, and then turn it on again.
If this error message appears again,
replace the DIMM with a new one.
(See Advanced User's Guide:
Installing
extra memory
.)
Document Jam
The document was not
inserted or fed correctly, or the
document scanned from the
ADF was too long.
See
Document is jammed in the top of the ADF
unit
uu
page 59 or
Using the automatic
document feeder (ADF)
uu
page 23.
Drum Error
The corona wire on the drum
unit needs to be cleaned.
Clean the corona wire on the drum unit.
(See
Cleaning the corona wire
uu
page 45.)
The toner cartridge is placed in
the machine without the drum
unit.
Put the toner cartridge into the drum unit, and
then re-install the drum unit and toner cartridge
assembly in the machine.
Drum Stop
It is time to replace the drum
unit.
Replace the drum unit.
(See
Replacing the drum unit
uu
page 48.)
Duplex Disabled
The back of the machine is not
closed completely.
Close the back cover of the machine.
Fuser Error
The temperature of the fuser
unit does not rise to a specified
temperature within the
specified time.
Turn the power switch off, wait a few seconds,
and then turn it on again. Leave the machine
for 15 minutes with the power on.
The fuser unit is too hot.
Jam Duplex
The paper is jammed in the
duplex tray or the fuser unit.
See
Paper is jammed in the duplex tray
uu
page 70.
Jam Inside
The paper is jammed inside the
machine.
See
Paper is jammed inside the machine
uu
page 66.
The toner cartridge is placed in
the machine without the drum
unit.
Put the toner cartridge into the drum unit, and
then re-install the drum unit and toner cartridge
assembly in the machine.
Jam MP Tray
The paper is jammed in the MP
tray of the machine.
See
Paper is jammed in the MP tray
uu
page 61.
Jam Rear
The paper is jammed in the
back of the machine.
See
Paper is jammed at the back of the
machine
uu
page 63.
Error Message
Cause
Action