Brother International DCP-J152W Quick Setup Guide - Page 13
For Macintosh USB interface users, Before you install, Connect the USB cable
View all Brother International DCP-J152W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
USB Macintosh For Macintosh USB interface users (Mac OS X v10.6.8, 10.7.x, 10.8.x) 10 Before you install b Connect the USB cable to the USB port marked with a symbol. You will find the USB port inside the machine, as shown in the callout below. Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights. NOTE For Mac OS X v10.6.0 to 10.6.7 users, upgrade to Mac OS X v10.6.8 - 10.8.x. 11 Connect the USB cable NOTE • DO NOT connect the machine to a USB port on a keyboard or a non-powered USB hub. • Connect the machine directly to your Macintosh. a Lift the scanner cover until it locks securely into the open position. c Carefully guide the USB cable into the cable channel and out the back of the machine. Connect the cable to your Macintosh. IMPORTANT Make sure that the cable does not restrict the cover from closing, or an error may occur. Windows® Macintosh USB 13