Brother International DCP-J152W Quick Setup Guide - Page 3
Important
View all Brother International DCP-J152W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
d Unpack the ink cartridge. Turn the green release lever on the orange protective packing a counterclockwise until it clicks to release the vacuum seal. Then remove the orange protective packing a as shown. IMPORTANT • DO NOT shake the ink cartridges. If ink stains your skin or clothing, wash with soap or detergent at once. • DO NOT touch the cartridge in the area indicated b, as this can cause the machine not to function with the cartridge. 2 1 e Take care to match the sticker color a with the cartridge color b as shown in the diagram below. Install each ink cartridge in the direction of the arrow on the label. 1 2 f Gently push the back of the ink cartridge marked "PUSH" until it latches. After all the ink cartridges are installed, close the ink cartridge cover. 2 1 NOTE The machine will prepare the ink tube system for printing. This process will take approximately four minutes. Do not turn off the machine. We recommend you perform the next step while waiting. 3