Brother International DCP-J152W Quick Setup Guide - Page 2
Connect the power cord, Install the ink cartridges
View all Brother International DCP-J152W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
a Remove the protective tape and film covering the machine, and also from the LCD. b Remove the plastic bag a containing the ink cartridges from on top of the paper tray. 1 c Make sure you have all the components. 2 Connect the power cord 3 Install the ink cartridges CAUTION If ink gets in your eyes, wash it out with water at once and call a doctor if you are concerned. NOTE Make sure you install the Starter Ink Cartridges included with your machine first. a Make sure that the power is turned on. The LCD will show No Ink Cartridge. b Open the ink cartridge cover a. NOTE DO NOT connect the USB cable yet (if you are using a USB cable). a Connect the power cord. 1 c Remove the orange protective part a. NOTE • The Warning LED on the control panel will stay on until you have installed the ink cartridges. • To prolong the life of the print head, provide the best ink cartridge economy and maintain print quality, we do not recommend unplugging the machine frequently and/or leaving the machine unplugged for extended periods of time. Each time you plug the machine in, it automatically cleans the print head, which uses some of your ink. We recommend using to power down the machine. Using allows minimal power to the machine, resulting in periodic, but less frequent, cleaning of the print head. 1 NOTE Do not throw away the orange protective part. You will need it if you transport the machine. 2