Brother International HL 4040CN Quick Setup Guide - English - Page 15
Print a test Improper Setup - jam tray 1
UPC - 012502617785
View all Brother International HL 4040CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Setting Up the Machine 3 Fan the stack of paper well to avoid paper jams and misfeeds. 1 Lift the LCD display and adjust it for the best viewing angle. 4 Put paper in the paper tray. Make sure that the paper is flat in the tray and below the maximum paper mark. 2 Unfold the support flap. 5 Put the paper tray firmly back into the printer. Make sure that it is completely inserted into the printer. 3 Make sure that the printer power switch is off. Remove the label covering the AC power inlet. 5 Print a test page Improper Setup DO NOT connect the interface cable yet. 4 Connect the AC power cord to the printer. 13
Setting Up the Machine
13
3
Fan the stack of paper well to avoid paper jams
and misfeeds.
4
Put paper in the paper tray. Make sure that the
paper is flat in the tray and below the maximum
paper mark.
5
Put the paper tray firmly back into the printer.
Make sure that it is completely inserted into the
printer.
5
Print a test page
Improper Setup
DO NOT connect the interface cable yet.
1
Lift the LCD display and adjust it for the best
viewing angle.
2
Unfold the support flap.
3
Make sure that the printer power switch is off.
Remove the label covering the AC power inlet.
4
Connect the AC power cord to the printer.