Home » Brother International Manuals » Laser Printers » Brother International HL 4040CN » Manual Viewer

Brother International HL 4040CN Quick Setup Guide - English - Page 4

Safety Precautions, To Use the Printer Safely - remove fuser

UPC - 012502617785

View all Brother International HL 4040CN manuals

Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

Safety Precautions To Use the Printer Safely Warning There are high voltage electrodes inside the printer. Before you clean the inside of the printer, make sure that you have turned off the power switch and unplugged the printer from the AC power outlet. DO NOT handle the plug with wet hands. Doing this might cause an electrical shock. The fuser unit becomes extremely hot during operation. Wait until it has cooled down sufficiently before replacing consumable items. DO NOT remove or damage the caution labels located on or around the fuser. DO NOT use flammable substances or any type of spray to clean the inside or outside of the machine. Doing this may cause a fire or electrical shock. Refer to the User's Guide for how to clean the machine. 2

Section	Page
Quick Setup Guide HL-4040CN / HL-4050CDN	1
Symbols used in this guide	2
Table of Contents	3
Safety Precautions	4
To Use the Printer Safely	4
Regulations	6
Getting Started	9
What is in the box?	9
Control panel	10
Supplied CD-ROM	11
Setting Up the Machine	12
1 Put the CD-ROM into the CD-ROM drive	12
For Windows® users	12
For Macintosh® users	12
2 Remove the packing materials from the printer	13
3 Installing the toner cartridges	14
4 Load paper in the paper tray	14
5 Print a test page	15
6 Setting your language on the control panel	16
Installing the Printer Driver	17
Windows®	18
For USB interface cable users	18
For parallel interface cable users (HL-4050CDN users)	20
For network interface cable users	21
For Peer-to-Peer network printer users	21
For shared network printer users	23
Macintosh®	25
For USB interface cable users	25
For network interface cable users	27
For Network Users	29
BRAdmin Light utility (For Windows® users)	29
Installing the BRAdmin Light configuration utility	29
Setting your IP address, Subnet Mask and Gateway using BRAdmin Light	29
BRAdmin Light utility (For Mac OS® X users)	30
Setting your IP address, Subnet Mask and Gateway using BRAdmin Light	30
Web Based Management (web browser)	31
Network default settings	31
Print the Printer Settings Page	31
Consumables and Options	32
Options	32
Consumables	32
Other Information	33

Match case Limit results 1 per page

Safety Precautions

To Use the Printer Safely

Warning

There are high voltage electrodes inside the printer. Before you clean the inside of the printer, make sure that

you have turned off the power switch and unplugged the printer from the AC power outlet.

DO NOT handle the plug with wet hands. Doing this might cause an electrical shock.

The fuser unit becomes extremely hot during operation. Wait until it has cooled down sufficiently before

replacing consumable items. DO NOT remove or damage the caution labels located on or around the fuser.

DO NOT use flammable substances or any type of spray to clean the inside or outside of the machine. Doing

this may cause a fire or electrical shock. Refer to the User's Guide for how to clean the machine.