Brother International Quattro 2 6700D Circular Attachment Instruction Manual - - Page 5
Attaching the Circular Attachment, Sewing a Circle - screwdriver
View all Brother International Quattro 2 6700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ENGLISH Attaching the Circular Attachment Sewing a Circle a Place the circular attachment at left as shown in the figure. → The two tabs on the underside of the attachment will drop down into corresponding holes in the needle plate, so that the attachment lays flat on the bed of your machine. Note • Thread the machine needle before setting the pivot pin into the circular attachment. Threading lever may hit the pivot pin and damage the pin or the machines threading mechanism. a Raise the handle. 40 30 b Insert the screw on the circular attachment in the screw hole at the right of the needle plate (a). b Slide the indicator to match the desired size of your circle. a Attachment Screw c Securely tighten the screw with the discshaped screwdriver included in your machine. Note • Do not slide the indicator by holding onto the pivot pin, doing so may cause the pivot pin to bend or break. a Disc-shaped screwdriver 3