Brother International Quattro 2 6700D Circular Attachment Instruction Manual - - Page 8
Cording Foot
View all Brother International Quattro 2 6700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
a Loosen the screw on the guide plate sliding the plate to fit the width of the braid. ■ CORDING FOOT You can embellish using 1 to 3 cords of decorative threads or yarn. a Slip a cord from the right of the presser foot, into each guide (to use single cord, use the center guide). a Plate b Insert the braid through the guide before attaching the foot onto the machine. b Place the cords under and to the back of the cording foot. c Tighten the screw and pull the braid to the back of the braiding foot. d Attach the foot onto the machine. c Select a zigzag or decorative stitch and sew in a circular manner gently guiding the cords. e Select the desired stitch and sew in a circular manner gently guiding the braid. Note • When sewing with zigzag or decorative stitches, adjust the stitch width, so that it is slightly wider than the width of the braid or cording. 6