Canon 2MC Elura 2 and Elura 2MC Instruction Manual - Page 20
Zooming
UPC - 013803606294
View all Canon 2MC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
2_ELURA2_E(08-32) 7/25/00 17:03 Page 20 Zooming E W Zoom out Zoom in T Mastering the Basics 10× optical zoom The camera's 10× zoom lens allows you to choose the best picture angle for each scene: • Move the zoom control towards W to zoom out to wide-angle. • Move it towards T to zoom in to telephoto. You can also control the speed of zooming: • Move the control slightly to zoom slowly. • Move it farther to zoom more quickly. (The farther you move the zoom control, the faster the zoom speed.) The T and W buttons on the wireless controller adjust the picture angle, but not the zoom speed. 40× digital zoom Magnifies the camera's zoom range by up to 4×. The zoom control continues to work as usual. You can freely zoom in and out between 1× and 40× magnification - the camera automatically switches between optical zooming (up to 10×) and digital zooming (10× to 40×). A zoom bar shows up in the display. The digital zoom area is in blue. MOVIE P.SCAN CARD REC ( 34) CAM.SET UP D.ZOOM ON To turn the digital zoom off, open the menu and select CAM.SET UP. Then select D.ZOOM, set it to OFF and close the menu. • When zooming, as a rule, keep at least 3 ft 33/8 in (1 m) between you and your subject. However when the zoom is at the wide-angle position, you can focus on a subject as close as 3/8 in (1 cm). • Image resolution is slightly lower when the magnification is greater than 10×. 20 • You cannot use digital zoom when the multi-image screen is set. The display becomes "- - -".