Canon 2MC Elura 2 and Elura 2MC Instruction Manual - Page 50

Press the PHOTO button fully down to take the still picture.

Page 50 highlights

3_ELURA2_E(33-79) 7/25/00 17:09 Page 50 • If the subject is unsuitable for autofocus ( 125), the camera may not be E able to focus, and F may continue to flash white in the display. Adjust the focus manually with the SELECT dial. • If you are using manual focus ( 72), the F mark starts as a continous green mark. Focus with the SELECT dial. 2. Press the PHOTO button fully down to take the still picture. • The camera takes the image immediately, and then records the "photo" to the tape for approximately 6 seconds. During this time the camera also records the sound, and the display shows the still picture. • A counter display appears, and counts up to 6 seconds as the camcorder records the picture. F disappears from the display. • The camera returns to record pause mode. • The camera automatically returns to record pause mode after recording a still image for approximately 6 seconds. If a cassette is inserted and you turn the POWER dial to OFF during those approximately 6 seconds, the camera will respond only after recording is complete. • The wireless controller's PHOTO button has no half-way setting. Press the button fully and the camera immediately takes the "photo". • Only take "photos" where it is bright enough to see the image in the display. • If you want to use an effect, make sure you set it before you take your picture. Using the Full Range of Features 50

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147

50
E
Using the Full
Range of Features
If the subject is unsuitable for autofocus (
125), the camera may not be
able to focus, and
F
may continue to flash white in the display. Adjust the
focus manually with the SELECT dial.
If you are using manual focus (
72), the
F
mark starts as a continous
green mark. Focus with the SELECT dial.
2.
Press the PHOTO button fully down to take the still picture.
The camera takes the image immediately, and then records the “photo” to
the tape for approximately 6 seconds. During this time the camera also
records the sound, and the display shows the still picture.
A counter display appears, and counts up to 6 seconds as the camcorder
records the picture.
F
disappears from the display.
The camera returns to record pause mode.
The camera automatically returns to record pause mode after recording a still
image for approximately 6 seconds. If a cassette is inserted and you turn the
POWER dial to OFF during those approximately 6 seconds, the camera will
respond only after recording is complete.
The wireless controller’s PHOTO button has no half-way setting. Press the
button fully and the camera immediately takes the “photo”.
Only take “photos” where it is bright enough to see the image in the display.
If you want to use an effect, make sure you set it before you take your picture.
3_ELURA2_E(33-79)
7/25/00 17:09
Page 50