Canon 3200B002 User Manual - Page 109
Patchcode Orientation ISIS Driver Only, Stamp, Prescan, Buttons
View all Canon 3200B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Patchcode Orientation (ISIS Driver Only) This function is enabled when batch separation is set to [Patchcode]. Set the orientation to match that of the patchcode of the patchcode sheet. Chapter 8 ISIS/TWAIN Driver Settings Prescan Prescan and display the first document page in the Prescan window when scanning is started. Continue scanning after you confirm or adjust the brightness and contrast of the scanned image in the Prescan window. Hint [Patchcode Orientation] must be set as follows to match that in the document. Flatbed Document: Face Down Feeder Document: Face Up Patchcode Sheet Patchcode Orientation 0 degrees 90 degrees 180 degrees 270 degrees Stamp This function is for affixing the scanned stamp to scanned documents in the feeder, and is displayed when the optional stamp is installed. Select this check box to affix the scanned stamp to following position of scanned documents. • Stamp side: Scanned side(s) (both sides when both sides are scanned) • Stamp position: A position approximately 0.4" (10 mm) from the end at the rear in terms of the feed direction • Stamp pattern: (Diameter of approximately 0.1" (3 mm)) Hint The pattern and position of the stamp cannot be changed. Buttons [OK] button Click this button to accept changes and close the Basic Setup dialog box. [Cancel] button Click this button to reject changes and close the dialog box. [Help] button Click this button to display help for this dialog box. 8-18