Canon 6864A001AA PowerShot A10/A20 Camera User Guide - Page 72
Connect the direct interface, cable to the printer and to the, camera., The camera power is turned,
UPC - 013803001983
View all Canon 6864A001AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
2 Connect the direct interface cable to the printer and to the camera. Digital Terminal Direct Interface Cable DIF-100 • Two direct interface cables are included with the Card Photo Printer CP-10. Use only the DIF-100 cable with mark on the connector (The Digital Camera Photo Printer Kit CPK-A10 includes the Direct Interface Cable DIF-100 only.). • When connecting the cable to the camera's Digital terminal, connect the cable end marked to the Digital terminal. Ensure that the mark faces 70 the rear of the camera (monitor side). When disconnecting the cable from the camera's Digital terminal, be sure to hold the connector at its sides and pull it straight out. 3 The camera power is turned on and set the mode dial to . If the printer is correctly connected, the icon will appear on the LCD monitor. • For information about how to load paper and ink cassettes into the printer, refer to the printer's User Guide.