Canon BJ-20 User Manual - Page 35
Charging the pack, Turn on the printer.
View all Canon BJ-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
To remove the installed battery pack: Do steps 1 and 2 as described in the "Installing the Pack" section, then pull out the battery by the tab. Charging the pack See page 92 Using the pack 1 Make sure the printer is turned off and the battery pack switch is switched on. 2 Unplug the AC adapter from the printer. 3 Turn on the printer. Power is supplied from the battery pack. If the POWER indicator blinks, check for low battery (page 105)
To remove the installed battery pack:
Do steps 1 and 2 as described in the "Installing the Pack" section, then pull out the
battery by the tab.
Charging the pack
See page 92
Using the pack
1
Make sure the printer is turned off and the battery pack switch is switched
on.
2
Unplug the AC adapter from the printer.
3
Turn on the printer.
Power is supplied from the battery pack. If the POWER indicator blinks,
check for low battery (page 105)