Canon BJ-20 User Manual - Page 61
Selecting Printer Emulation, the IBM Proprinter X24E, and the Canon BJ-l 30e printers. - ink cartridge
View all Canon BJ-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
you can put the printer into high speed (110 cps), lower quality mode. Selecting High Speed 1 Make sure the printer is online. 2 Press the LF/FF and FWD ADJ switches simultaneously to light the HIGH SPEED indicator. Selecting High Quality 1 Make sure the printer is online. 2 Press the LF/FF and FWD ADJ switches simultaneously until the HIGH SPEED indicator goes off. Note When the printer is running at high speed less ink is used, thus extending the BJ cartridge life. Selecting Printer Emulation The BJ-20 allows you to emulate three types of printers: the Epson LQ510, the IBM Proprinter X24E, and the Canon BJ-l 30e printers. They are further grouped under two modes: the LQ mode and the BJ-lOe mode, as shown in the table below.
you can put the printer into high speed (110 cps), lower quality mode.
Selecting Printer Emulation
The BJ-20 allows you to emulate three types of printers: the Epson LQ-
510, the IBM Proprinter X24E, and the Canon BJ-l 30e printers. They
are further grouped under two modes: the LQ mode and the BJ-lOe
mode, as shown in the table below.
Selecting
High
Speed
1
Make sure the printer is online.
2
Press the LF/FF and FWD ADJ switches simultaneously to light the HIGH
SPEED indicator.
Selecting High
Quality
1
Make sure the printer is online.
2
Press the LF/FF and FWD ADJ switches simultaneously until the
HIGH SPEED indicator goes off.
Note
When the printer is running at high speed less ink is used,
thus extending the BJ cartridge life.