Canon EOS-1Ds Mark III EOS-1Ds Mark III Instruction Manual - Page 133
Appending Dust Delete Data - white paper
UPC - 013803079265
View all Canon EOS-1Ds Mark III manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
3 Appending Dust Delete Data Normally, the Self Cleaning Sensor Unit will eliminate most of the dust visible on captured images. However, in case visible dust still remains, you can append the Dust Delete Data to the image to later erase the dust spots. The Dust Delete Data is used by the Digital Photo Professional (provided software) to erase the dust spots automatically. Preparation Get a solid-white object (paper, etc.). Set the lens focal length to 50mm or longer. Set the lens focus mode switch to and set the focus to infinity (∞). If the lens has no distance scale, look at the front of the lens and turn the focusing ring clockwise all the way. Obtain the Dust Delete Data 1 Select [Dust Delete Data]. Under the [2] tab, select [Dust Delete Data], then press . 2 Select [OK]. Turn the dial to select [OK], then press . After the automatic sensor cleaning ends, a message will appear. 133