Canon EOS-1Ds Mark III EOS-1Ds Mark III Instruction Manual - Page 143

wPrinting 5 Set the date and file number imprinting. Set as necessary. Turn the dial to select , then press . Turn the dial to select the desired setting, then press . 6 Set the number of copies. Set as necessary. Turn the dial to select , then press . Turn the dial to select the number of copies, then press . 7 Start printing. Turn the dial to select [Print], then press . X The printing will start. You can also print RAW and sRAW images taken by the camera. With RAW+JPEG images, the RAW image will be printed. And with sRAW+JPEG images, the JPEG image will be printed. For details on trimming, see page 145. The [Default] setting for printing effects and other options are the printer's own default settings as set by the printer's manufacturer. See the printer's instruction manual to find out what the [Default] settings are. Depending on the image's file size and recording quality, it may take some time for the printing to start after you select [Print]. If image tilt correction (p.145) has been applied, it will take longer to print the image. After the [Do not disconnect cable] message disappears, you can disconnect the cable even during printing. To stop the printing, press while [Stop] is displayed, then select [OK]. 143