Canon EOS-1Ds Mark III EOS-1Ds Mark III Instruction Manual - Page 157

3 Setting Custom Functions Custom Functions C.Fn I: Exposure 1 Exposure level increments 2 ISO speed setting increments 3 Set ISO speed range 4 Bracketing auto cancel 5 Bracketing sequence 6 Number of bracketed shots 7 Spot metering link to AF point 8 Safety shift 9 Select usable shooting modes 10 Select usable metering modes 11 Exposure mode in manual exposure 12 Set shutter speed range 13 Set aperture value range 14 Apply shooting/metering mode 15 Flash sync. speed in Av mode C.Fn III: Auto focus/Drive 1 USM lens electronic MF 2 AI Servo tracking sensitivity 3 AI Servo 1st/2nd image priority 4 AI Servo AF tracking method 5 Lens drive when AF impossible 6 Lens AF stop button function 7 AF Microadjustment 8 AF expansion with selected point 9 Selectable AF point 10 Switch to registered AF point 11 AF point auto selection 12 AF point display during focus 13 AF point brightness 14 AF-assist beam firing 15 Mirror lockup 16 Continuous shooting speed 17 Limit continuous shot count C.Fn II: Image/Flash exposure/Display 1 Long exposure noise reduction 2 High ISO speed noise reduction 3 Highlight tone priority 4 E-TTL II flash metering 5 Shutter curtain sync. 6 Flash firing 7 Viewfinder info. during exposure 8 LCD panel illumination during Bulb 9 INFO button when shooting The Custom Functions whose numbers are shaded do not function during Live View shooting. (Settings are disabled.) C.Fn IV: Operation/Others 1 Shutter button/AF-ON button 2 AF-ON/AE lock button switch 3 Quick Control Dial in metering 4 SET button when shooting 5 Tv/Av setting for Manual exposure 6 Dial direction during Tv/Av 7 Av setting without lens 8 WB + media/image size setting 9 H button function 10 Button function when 5 11 Focusing Screen 12 Timer length for timer 13 Shortened release time lag 14 Add aspect ratio information 15 Add original decision data 16 Live View exposure simulation 157