Canon EOS-1Ds Mark III EOS-1Ds Mark III Instruction Manual - Page 34
lit, never do any of the following. Doing so may damage the image
UPC - 013803079265
View all Canon EOS-1Ds Mark III manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Installing and Removing the Memory Card The access lamp lights during any of the following operations: The image is being exposed, being written to or read by the memory card, being erased, or data is being transferred. While the access lamp is lit, never do any of the following. Doing so may damage the image data. It may also damage the memory card or camera. • Opening the card slot cover. • Removing the battery. • Shaking or banging the camera around. If the memory card already contains recorded images, the image number might not start from 0001. (p.79) Compared to other memory cards, hard disk-type cards are more vulnerable to vibration and physical shock. If you use a such a card, be careful not to subject the camera to vibration or physical shock especially while recording or playing images. When holding a hard disk-type card, always hold its sides. You may damage the card by holding its flat surfaces. Do not touch the SD card's contacts with your fingers or metal objects. Even with the power switch set to , when you insert or remove a memory card, the access lamp might blink. If a memory card-related error is displayed, see page 48. 34