Canon LASER CLASS 830i LASER CLASS 830i/810 Basic Operation Guide - Page 23

What Can I Do with This Machine? How to Use This Guide Symbols Used in This Manual The following symbols are used throughout the manuals for the machine and indicate the warnings, cautions and notes you should keep in mind when using the machine. Indicates a warning that may lead to death or serious injury if not observed. Explains how to avoid actions that could injure you or damage your machine. Explains operating restrictions and how to avoid minor difficulties. In addition, this guide uses distinctive notations to identify keys and information in the LCD: - The keys you press appear in square brackets: [Stop]. - Information in the LCD appears in angle brackets: . The numbers that point to the keys on the operation panel diagram correspond to the order of steps to take in the procedure. llustrations Used in This Manual Unless otherwise mentioned, illustrations used in this manual are those taken when no optional equipment is attached to the LASER CLASS 830i. The model LASER CLASS 830i is used for illustration purposes in this manual. When there is any difference between the LASER CLASS 830i and the LASER CLASS 810, it is clearly indicated in the text, e.g., " LASER CLASS 830i Only." xxi