Canon LASER CLASS 830i LASER CLASS 830i/810 Basic Operation Guide - Page 370

SYSTEM SETTINGS 2. STATELESS ADD SET Sets whether to automatically specify a stateless address upon startup. - OFF - ON 3. MANUAL ADD SET Allocates an IPv6 address to the machine manually. 1. USE MANUAL ADD Sets whether to set a fixed IPv6 address to the machine. OFF A fixed IPv6 address is not set. ON Sets a fixed IPv6 address to the machine. 2. MANUAL ADDRESS Registers a fixed IPv6 address to the machine. 3. PREFIX LENGTH Sets the prefix length of the IPv6 address. (0-128) 4. DEF. ROUTER ADD Sets the default router address. 4. USE DHCPv6 Sets whether to set to obtain a stateful address from a DHCP server using DHCPv6. - ON - OFF 5. PING COMMAND Enables you to check whether the machine can connect to a device on the network. 1. PING COMMAND Enter the IPv6 address of a device on the network and press [OK] to check whether the machine can connect to that device. 2. HOST NAME Enter the host name of a device on the network and press [OK] to check whether the machine can connect to that device. 6. SET IP ADD RANGE Sets whether to restrict the range of IP addresses. OFF Disables restriction of IP address of computers. ON Enables you to set which IP addresses can send data (print/fax jobs) to the machine. You can select to permit or reject up to ten ranges of IP addresses. Set each range of IP addresses by entering an IP address in both , and . - 1. IP ADDRESS 1 - 2. IP ADDRESS 2 - 3. IP ADDRESS 3 - 4. IP ADDRESS 4 - 5. IP ADDRESS 5 - 6. IP ADDRESS 6 - 7. IP ADDRESS 7 - 8. IP ADDRESS 8 - 9. IP ADDRESS 9 - 10. IP ADDRESS 10 Machine Settings 12-40