Canon LASER CLASS 830i LASER CLASS 830i/810 Basic Operation Guide - Page 294
Paper Jams, toward the machine, then remove
View all Canon LASER CLASS 830i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 294 highlights
Paper Jams 2 When appears on the LCD display, remove jammed paper from inside the machine first, then from the paper cassette if necessary. Check the following if you experience repeated paper jams: - Even the edge of the paper stack by a flat surface before loading it in the machine. - Check that the paper you are using meets the requirements for use. - Make sure you have removed any scraps of paper from inside the machine. 1 Open the left cover. 3 Carefully pull the jammed paper out of the machine. - Do not touch the fixing assembly (A) as it becomes very hot during use. - If you tear the paper, remove any torn pieces to avoid further jams. - If loose toner comes into contact with your skin or clothing, wash with cold water. Warm water will set the toner. Tilt the 2-sided transport guide (A) toward the machine, then remove the jammed paper (Only for 2sided copying). Troubleshooting 11-4