Canon LASER CLASS 830i LASER CLASS 830i/810 Basic Operation Guide - Page 325
Copying Problems
View all Canon LASER CLASS 830i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 325 highlights
Copying Problems Blank paper comes out from the machine. Have you removed the plastic seal from the toner cartridge? Make sure you remove the seal from the cartridge. (See "Set Up the Machine," in the Starter Guide.) Is the toner cartridge installed properly? Make sure the toner cartridge is installed properly. (See "Set Up the Machine," in the Starter Guide.) Is the cartridge out of toner? Replace the toner cartridge. (See "Replacing the Toner Cartridge," on p. 10-11.) Copy is too light or has uneven density. Is the toner low or unevenly distributed? Redistribute the toner inside the toner cartridge. If the problem persists, replace the toner cartridge. (See "Replacing the Toner Cartridge," on p. 10-11.) Copy has vertical white streaks. Is the toner low or unevenly distributed? Redistribute the toner inside the toner cartridge. If the problem persists, replace the toner cartridge. (See "Replacing the Toner Cartridge," on p. 10-11.) Copy is spotted or dirty. If the copy is dirty, clean the interior of the machine (components), the ADF roller, and the scanning area. (See "Cleaning the Machine," on p. 10-2.) Paper jams occur. Make sure the scanning platform and rear cover are fully closed. (See "Paper Jams," on p. 11-4.) 11-35 Troubleshooting