Canon LASER CLASS 830i LASER CLASS 830i/810 Basic Operation Guide - Page 375
Link Local Add, Subnet Mask
View all Canon LASER CLASS 830i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 375 highlights
SYSTEM SETTINGS 4. DEDICATED PORT Sets or browses detailed information on the machine with a Canon printer driver or utility. - ON - OFF 5. ETHERNET DRIVER Specifies the type of network connection. 1. AUTO DETECT Selects the detection method of Ethernet driver. AUTO Sets the machine to determine the communication mode (Half duplex/Full duplex) and Ethernet type (10Base-T/100Base-TX) automatically. MANUAL Sets the communication mode and Ethernet type manually. 1. COMMUNICATN MODE Selects the communication mode. - HALF DUPLEX - FULL DUPLEX 2. ETHERNET TYPE Selects the Ethernet type. - 10 BASE-T - 100 BASE-TX 6. NETWORK INFO Checks the current network settings. 1. IPv4 Checks the IPv4 settings. 1. IP ADDRESS Checks the IP address. 2. SUBNET MASK Checks the subnet mask. 3. GATEWAY ADDRESS Checks the gateway address. 4. DOMAIN NAME Checks the domain name. 5. HOST NAME Checks the host name. 2. IPv6 Checks the IPv6 settings. 1. LINK LOCAL ADD 2. STATELESS ADD. 1 3. STATELESS ADD. 2 4. STATELESS ADD. 3 Checks the link local address. - 1. IP ADDRESS - 2. PREFIX LENGTH Checks the stateless address 1. - 1. IP ADDRESS - 2. PREFIX LENGTH Checks the stateless address 2. - 1. IP ADDRESS - 2. PREFIX LENGTH Checks the stateless address 3. - 1. IP ADDRESS - 2. PREFIX LENGTH Machine Settings 12-45