Canon LASER CLASS 830i LASER CLASS 830i/810 Basic Operation Guide - Page 369
Set Ip Add Range, Dns Server Set
View all Canon LASER CLASS 830i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 369 highlights
SYSTEM SETTINGS 3. SET IP ADD RANGE Sets whether to restrict the range of IP addresses. OFF Disables restriction of IP address of computers. ON Enables you to set which IP addresses can send data (print/fax jobs) to the machine. You can select to permit or reject up to eight ranges of IP addresses. Set each range of IP addresses by entering an IP address in both and . - 1. IP ADDRESS 1 - 2. IP ADDRESS 2 - 3. IP ADDRESS 3 - 4. IP ADDRESS 4 - 5. IP ADDRESS 5 - 6. IP ADDRESS 6 - 7. IP ADDRESS 7 - 8. IP ADDRESS 8 - 9. IP ADDRESS 9 - 10. IP ADDRESS 10 4. DNS SETTINGS Sets the DNS server settings. 1. DNS SERVER SET Registers the DNS server address. 1. PRIM. DNS SERVER Registers the primary server address. 2. SECOND Registers the secondary server address. DNS SERVER 2. HOST/DOMAIN Registers the host name and domain name of the DNS server. NAME 1. HOST NAME Registers the host name of the DNS server. 2. DOMAIN NAME Registers the domain name of the DNS server. 3. DNS DYNAMIC Sets whether to use the DNS server dynamic update setting. SET 1. DNS DYNA. UPDATE Sets whether to use the DNS server dynamic update function. - OFF - ON 2. IPv6 SETTINGS Sets IPv6 Address settings. (See "Set the Machine for Network Usage," in the Starter Guide.) 1. USE IPv6 Sets whether to use IPv6 networks. OFF Only IPv4 is used. ON Both IPv4 and IPv6 are used. A link local address is also automatically set. Machine Settings 12-39