Canon LASER CLASS 830i LASER CLASS 830i/810 Basic Operation Guide - Page 269
Scanning area, Then wipe the area with a soft, dry
View all Canon LASER CLASS 830i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 269 highlights
Scanning area 4 Clean the rollers (A) inside the ADF Keep the scanning area clean to avoid dirty with a cloth dampened with water. copies or faxes to be sent. Then wipe the area with a soft, dry ● ADF cloth. If your documents have black streaks or appear dirty after copying them using the ADF, this may be caused by pencil lead rubbing off the documents and onto the roller. Clean the ADF scanning area, film, and roller. 1 Turn off the main power switch and disconnect the power cord. 2 Lift the lever, and open the ADF cover. Do not dampen the cloth too much, as this may tear the document or damage the machine. 5 Clean the narrow glass plate (B) and the white plate (C) with a cloth dampened with water. Then wipe the area with a soft, dry cloth. Maintenance 3 Open the feeder front cover. - Do not push on the white plate hard. The white plate is a soft, delicate area. - Do not dampen the cloth too much, as this may tear the document or damage the machine. 10-7