Canon LASER CLASS 830i LASER CLASS 830i/810 Basic Operation Guide - Page 368
PDL JOBS W/OUT ID, Sets TCP/IPv4 network.
View all Canon LASER CLASS 830i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 368 highlights
SYSTEM SETTINGS 3. PRINT LIST 3. PDL JOBS W/OUT ID ON OFF 4. MANAGE USER ID 5. NETWORK SETTINGS* 1. TCP/IP SETTINGS 1. IPv4 SETTINGS 1. IP ADDRESS 1. IP ADDRESS AUTO. ON OFF 2. IP ADDRESS 3. SUBNET MASK 4. GATEWAY ADDRESS 2. PING COMMAND Prints counter information. Press [ ] to select . If you do not want to print the list, press [ ] to select . Sets if print jobs from computers with unknown IDs are accepted or rejected. Accepts print jobs from computers with unknown IDs. Rejects print jobs from computers with unknown IDs. Sets if the user ID management is used. - OFF - ON Sets the network setting. (See Reference Guide > Network Settings.) Sets TCP/IP network. Sets TCP/IPv4 network. Sets IPv4 Address settings. - 1. IP ADDRESS AUTO. - 2. IP ADDRESS - 3. SUBNET MASK - 4. GATEWAY ADDRESS Sets whether to automatically set an IP address. Enables an IP address to the machine automatically. - 1. DHCP (ON/OFF) - 2. BOOTP (OFF/ON) - 3. RARP (OFF/ON) Allocates an IP address to the machine manually. Registers a fixed IP address to the machine. (See "Set the Machine for Network Usage," in the Starter Guide.) Registers a fixed subnet mask to the machine. Registers a fixed gateway address to the machine. Enter the IP address of a device on the network and press [OK] to check whether the machine can connect to that device. Machine Settings 12-38