Canon MP190 Quick Start Guide - Page 48
An Error Code Is Displayed on the LED, Alarm Lamp Is Lit Orange - troubleshooting
UPC - 013803095166
View all Canon MP190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
An Error Code Is Displayed on the LED If an error code is displayed on the LED, take the corresponding action described below. Alarm Lamp Is Lit Orange When a printer error occurs, the Alarm lamp is lit orange. The number displayed on the LED indicates the type of error that has occurred. Check the error code displayed on the LED and take the appropriate action to correct the error. E and number (error code) are alternately displayed on the LED. Error Code Cause E, 2 The machine is out of paper. / Paper does not feed. E, 3 Paper Output Tray is closed. / Paper jam. E, 4/ E, 5 E, 7 E, 8 The FINE Cartridge cannot be recognized. FINE Cartridge is not installed in the correct position. Ink absorber is almost full. Action Reload the paper correctly and press the Black or Color button. If the Paper Output Tray is closed or not opened fully, open it fully. The machine resumes printing. If opening the Paper Output Tray fully does not resolve the problem, the paper may be jammed. Remove the jammed paper, reload paper properly in the machine, and then press the Black or Color button. See "Paper Jams" on page 55. The FINE Cartridge may not be installed properly, or the Cartridge may not be compatible with this machine. Open the Scanning Unit (Cover), and then make sure that the FINE Cartridges are installed properly and that the installed FINE cartridges are compatible with the machine. If the error is not resolved, the Print Head may be damaged. Contact your Canon Service representative. Make sure that each FINE Cartridge is installed in the correct position. See "Replacing a FINE Cartridge" on page 33. The machine has a built-in ink absorber to hold the ink used during Print Head Cleaning, for example. This error code indicates that the ink absorber is nearly full. Press the Black or Color button to cancel the error so you can continue printing. However, because printing is disabled once the ink absorber becomes completely full and until the ink absorber is replaced, you are recommended to contact your Canon service representative as early as possible. (You will need to replace a particular part of the machine.) 44 Troubleshooting