Canon MP190 Quick Start Guide - Page 61

Error Number: 300 Is Displayed, Ink Info Number: 1688 Is Displayed, Power, Alarm, Printer - driver mac

Get Canon MP190 - PIXMA Color Inkjet PDF manuals and user guides
UPC - 013803095166
View all Canon MP190 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

„ Error Number: 300 Is Displayed Cause Action The machine is not ready. Confirm that the Power lamp is lit green. If the Power lamp is off, turn the machine on. While the Power lamp is flashing green, the machine is initializing. Wait until the Power lamp stops flashing and remains lit green. If the Alarm lamp is lit orange, an error may have occurred on the machine. For details on how to resolve the error, see "An Error Code Is Displayed on the LED" on page 44. Machine is not connected properly. Your machine is not selected in Printer on the Print dialog box. Make sure that the USB cable is securely plugged into the machine and the computer. z If you are using a relay device such as a USB hub, disconnect it, connect the machine directly to the computer, and try printing again. If printing starts normally, there is a problem with the relay device. Consult the reseller of the relay device for details. z There could also be a problem with the USB cable. Replace the USB cable and try printing again. Select your machine's name in Printer on the Print dialog box. If your machine's name does not appear in Printer, follow the procedure below to check that the driver for your machine is installed to your computer. (1)Select Print & Fax Preferences in Printer. In Mac OS X v.10.3.9, select Edit Printer List in Printer. (2)Check that your machine's name is displayed in the list of printers and that the check box is selected. (3)If your machine's name is not displayed, click Add(+) to add the machine. If you cannot add the machine, follow the procedure described in your setup sheet to reinstall the MP Drivers. „ Error Number: 1700/1710 Is Displayed Cause The ink absorber is almost full. Action See "E, 8" (Ink absorber is almost full.) in "An Error Code Is Displayed on the LED" on page 44. „ Ink Info Number: 1688 Is Displayed Cause Ink has run out. Action See "E, 1, 6" (Ink has run out.) in "An Error Code Is Displayed on the LED" on page 44. „ Ink Info Number: 1686 Is Displayed Cause Ink level cannot be detected. Action See "E, 1, 3" (Ink level cannot be detected.) in "An Error Code Is Displayed on the LED" on page 44. Troubleshooting 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
57
Troubleshooting
Error Number: 300 Is Displayed
Error Number: 1700/1710 Is Displayed
Ink Info Number: 1688 Is Displayed
Ink Info Number: 1686 Is Displayed
Cause
Action
The machine is not ready.
Confirm that the
Power
lamp is lit green.
If the
Power
lamp is off, turn the machine on.
While the
Power
lamp is flashing green, the machine is initializing. Wait until the
Power
lamp stops flashing and remains lit green.
If the
Alarm
lamp is lit orange, an error may have occurred on the machine. For
details on how to resolve the error, see “An Error Code Is Displayed on the LED”
on page 44.
Machine is not connected properly.
Make sure that the USB cable is securely plugged into the machine and the
computer.
If you are using a relay device such as a USB hub, disconnect it, connect the
machine directly to the computer, and try printing again. If printing starts
normally, there is a problem with the relay device.
Consult the reseller of the relay device for details.
There could also be a problem with the USB cable. Replace the USB cable
and try printing again.
Your machine is not selected in
Printer
on the
Print
dialog box.
Select your machine’s name in
Printer
on the
Print
dialog box.
If your machine’s name does not appear in
Printer
, follow the procedure below
to check that the driver for your machine is installed to your computer.
(1)
Select
Print & Fax Preferences
in
Printer
.
In Mac OS X v.10.3.9, select
Edit Printer List
in
Printer
.
(2)
Check that your machine’s name is displayed in the list of printers and that
the check box is selected.
(3)
If your machine’s name is not displayed, click
Add(+)
to add the machine.
If you cannot add the machine, follow the procedure described in your setup
sheet to reinstall the MP Drivers.
Cause
Action
The ink absorber is almost full.
See “E, 8” (Ink absorber is almost full.) in “An Error Code Is Displayed on the
LED” on page 44.
Cause
Action
Ink has run out.
See “E, 1, 6” (Ink has run out.) in “An Error Code Is Displayed on the LED” on
page 44.
Cause
Action
Ink level cannot be detected.
See “E, 1, 3” (Ink level cannot be detected.) in “An Error Code Is Displayed on
the LED” on page 44.