Canon PIXMA MX870 MX870 series Getting Started - Page 10
button C on the Operation Panel, Display D, then press - print head
UPC - 013803119015
View all Canon PIXMA MX870 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
3 4 □ Turning the power off Be sure to follow the procedure below. 1. Press the ON button (A) to turn off the machine. 2. Make sure that all the lamps on the Operation Panel C are not lit. E 1 A 2 D Use the { or } button (C) on the Operation Panel to select the language for the LCD (Liquid Crystal Display) (D), then press the OK button. Make sure that the above screen is displayed and go to the next step. • If an unintended language is displayed on the LCD, press the Back button (E) to return to the Language selection screen. Operating noise may continue for up to 30 seconds until the machine turns off. • When removing the power plug, make sure that all the lamps on the Operation Panel are not lit before removing the plug. Removing the power plug while all the lamps on the Operation Panel light up or flash may cause drying and clogging of the Print Head, resulting in poor printing. 3 Turn the Power On If your machine is used as fax • Removing the power plug deletes all faxes stored in memory. Send or print faxes as necessary before removing the power plug.