Canon PowerShot A3000 IS PowerShot A3100 IS / PowerShot A3000 IS Camera User G - Page 123
Displaying the Overlay, Changing the IS-Mode Settings - image stabilizer
View all Canon PowerShot A3000 IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Changing Shooting Function Settings ● Displaying the Overlay You can display gridlines for vertical and horizontal guidance, or a 3:2 guide to confirm the printable area for postcard size prints. ● Choose [Disp. Overlay], then press the qr buttons to choose an option. Grid Lines 3:2 Guide Both A grid overlays the display. Gray bars will appear on the top and bottom of the display. This area will not print when printing on paper with a 3:2 aspect ratio. Both grid lines, and the 3:2 guide will display. • In mode, you cannot set [3:2 Guide] or [Both]. • Grid Lines will not be recorded on the image. • The gray areas displayed with [3:2 Guide] are the areas that will not be printed. The actual image recorded will include the portion in the gray areas. ● Changing the IS-Mode Settings ● Choose [IS Mode], then press the qr buttons to choose an option. Continuous Image stabilization is always on. You can confirm the result directly on the display, which makes it easier to check the composition or focus. Shoot Only Image stabilization is only active at the moment of shooting. Panning Image stabilization only counters up and down motion. This option is recommended for shooting objects moving horizontally. • If camera shake is too strong, attach the camera to a tripod. If you attach the camera to a tripod, you should set the IS Mode to [Off]. • When using [Panning], hold the camera horizontally to shoot. Image stabilization does not work when the camera is held vertically. 123